Friday, February 27, 2009

around philly dot com


So a customer to the shop wrote a little shopping experience at Via Bicycle. It is fun and whimsical and gives you a little insight, especially if you are not able to visit us. We find bikes for people and we usually don't curse. . . .in front of the customer.

an excerpt-
"Perhaps, the lifestyle began almost 27 years ago when Curtis set up shop on Ninth street, right off South, with four floors of bicycle Mecca. However, before the trademark ‘stache, Curtis was a kid growing up in rural upstate New York, pulling rusty bikes from trash heaps and breathing new life into them. It explains the scars on this hands and the way his thick fingers nimbly repair the tiny parts of a bike tire as we talk."


full article is here at aroundphilly.com.

Thursday, February 26, 2009

pictures 4- oh what a bore!

Part of the pictures series. This time we have a Moulton, Omelenchuk, and an invisible bike.
The Moulton was build during the period that Huffy was subcontracting them to import cool bikes(they also imported a super cool Carlton with Cappela lugs, and translucent paint over a chrome frame. My coworker Matt has one). This Moulton has a Sturmey Archer 4 speed internal hub and uses 17" wheels, that Moulton had specially designed and made.
The Omelenchuk rear wheel in a Omelenchuk frameset is very nice. There is not much available internet about George Omelenchuk, which is a shame. He was a local tinkerer and built and manufacturered a lot of his own components including stems, hubs, rims, etc. The hub was made by him and was on his wife's Jeanne's track bike. She won national titles on her bikes 5 times. here is a little blurb about Jeanne-here. Here is a little blurb about George OmelenchukBike Cult website.


and an invisible bike!!

Wednesday, February 25, 2009

Pictures 3- this time it's personal!

Here are a couple frames i picked up over the years, there is a good possibility that I will end up selling them this year.
early 1970s Jack Taylor "cyclo-cross" bike framest. It has brazeons for cantilever brakes but vertical rear dropouts and no eyelets for fenders. It also has round fork blades, typical of track bikes. I got the frameset with a campagnolo Nuovo Record headset and Mafac Cantilever brakes, but I have since used those parts for other projects, so just a frameset now. 58cm seattube.
The other frameset is a mid to late 1950s Peugeot PX10. It was original set up to take Simplex 543 rear derailleur. included is a Stronglight P3 headset.




Tuesday, February 24, 2009

Pictures 2-electric boogaloo!

Part 2 of a series of photos of cool bikes and parts-
this posting includes an early version Campagnolo headset, Simplex 543 rear derailleur, an Ottusi modified Brooks saddle, Nice late 1950s Frejus track bike, and then a set of toothed rear dropouts to be used with Campagnolo Cambio Corsa.








Monday, February 23, 2009

Pictures

The next few blog posts will be random pictures of cool interesting bicycle and parts.
this batch includes a nice repainted Tribune Blue Streak, with some incorrect parts, and a nice original Schwinn Aerocycle.



Sunday, February 22, 2009

Raleigh Ladies Tourist bicycle

Raleigh is best known for their black "English Racer" bicycles, made the ever popular, Sturmey Archer 3 speed equipped, bicycle for over 80 years. To the casual looker, the Raleigh bicycle from the 1930s is no different than same model produced in the 1970s. A perfect example is the Raleigh Tourist.

Barring some minor details, the Tourist model known for it's larger wheel size (28" x 1 1/2") and rod -actuated brakes(rather than cables), remained unchanged for decades. It is a common mistake that people see these bikes as early Raleighs, even though Raleigh produced this model into the 1980s.

This particular Ladies model has a hub that is dated from 1978, and dating Raleighs this way is fairly accurate when the wheels are original to the bicycle. The 1977 catalog scan was borrowed from Retro Raleighs , an invaluable source of catalogs and general information about vintage Raleighs.



Saturday, February 21, 2009

Classic Lightweights









Classic Lightweights UK website is an awesome resource
guide and great place for vintage British eyecandy. I have linked some items before while blogging to this website, but I feel that it deserves it own post. It is valuable to collectors and restorers much the same way Classic Rendezvous is, but they have taken a more micro approach, focusing on vintage British lightweights and components, compared to the more macro, broader scope of all vintage lightweights that Classic Rendezvous deals with.

These are some of the pictures from the website showing some truly British ideas and designs. Vibrant stays on a Hetchins, Shellwin's cool hub flanges, curve seattube Jack Taylor, Burlite brakes, and a Baines International radical frame design.

Friday, February 20, 2009

Louison Bobet 650b bicycle

Louison Bobet was a very famous French racer, best known for his 3 consecutive Tour du France victories. He raced for the French bicycle manufacturer, Stella for many years. He was forced into retirement after a car accident.

This bike is mid-level 1960s touring bike. Fr0m a distance, it looks like a typical French touring bike complete with racks, fenders, lights and even Guidonnet brake levers. But upon closer inspection, one notices heavy steel rims, cottered steel cranks, and 2nd tier components. That is not to mention the lax attention detail on on the frame and lug treatment.

The bike was outfitted with Huret Allvit derailleurs, with a 600 front derailleur. The brakes are CLB cantilevers and CLB guidonnet brake levers for top of handlebar braking position. The bicycle also has a set of racks with a cool protector around the headlight.

I guess this bike would be an entry lever touring bike. This bike is what collectors would call "barn fresh," it is in the same state it has been in for a really long time, taking the date from the tag hanging on it, since 1983, over 25 years untouched. There is much to be upgraded on it to make it a more reliable and lightweight bike but might make a good rider. More information on Louison Bobet bike here on Classic Rendezvous.



Thursday, February 19, 2009

Lytaloy=light alloy

Lytaloy was a product of Hobbs of Barbican. They produced brakes, headsets, cranksets, bottom brackets, and pedals. It is thought that the components were produced by outside contactors and they were regarded as top of the line parts. Lytaloy was very expensive at the time.

The cranks look great but were prone to breaking. This set of cranks looks suprisingly well for a 50+ year old cranks that usually only lasted a couple years, or less.

Wednesday, February 18, 2009

Desktop

This picture of my desktop actually serves as my "desktop" on my computer screen. many jokes are pointed on how cluttered my desktop gets(both on my computer and on my desktop!). A keen collector eye can see some pretty rare and valuable items amid the mess. (Click on picture to see bigger)

Some items I can pick out of the "where's waldo" picture-
*Campagnolo Cambio Corsa rear hub
*Schwinn headbadges
*Shimano AX oversize pedal adapter
*Raleigh Chopper brake lever and rear seat spring
*Mafac brake lever hoods
*Early Stonglight bottom bracket spindle (nutted)
*Simplex quick release skewer plastic wingnut
*Stronglight P3 headset locknut

and rarest of them all-
*Via Bicycle pen. We never ordered them, but we got this one free!

Tuesday, February 17, 2009

Triumph!!!

This is a late 1960s Triumph 3 speed bicycle that was recently purchased by a friend of mine. They were looking for a classic city bike for light tooling around town and doing it in style. Triumph, at this point, was a subsidiary of Raleigh Industries and building the popular "English Racer" 3 speeds.

The bike with fenders, a chainguard, and upright handlebars makes for an excellent city commuter. Most riders of these bikes find that
the Sturmey Archer 3 speed internal gear is more than adequate for a city like Philadelphia. I find that a lot of my commute, I usually only use 2 gears.

Monday, February 16, 2009

Recent Jack Taylor purchase

This recent Jack Taylor was spotted at a recent bicycle swap meet. It is a tall frame(61cm, I believe) and it has a real hodgepodge of parts on it, from Suntour Superbe brakes, Campagnolo Nuovo Record headset and rear derailleur, Super Record front derailleur, etc.

Jack Taylor Cycles were known for for their touring bikes and tandems, not so much for their strictly road bikes. This bike was built without provisions to install fenders or racks or anything else Jack Taylor were best known for. The frame does have the typical beautiful box lining and even nice lug lining.


This bike will probably end up with an employee or friend of the shop, as we always like to treat our friends. Finding beautiful bikes like these are always excellent to find and even better when they "stay in the family" and you get see them enjoyed.



Sunday, February 15, 2009

Frexel inverse Brake levers

I love city bikes. I don't understand people that ride bikes in the city without fenders and chainguards, and dare I say. . . upright riding position!!

The search for brake levers for the upright riding position leaves the rider looking either at current stock(modern plastic/aluminum Mtn. bike levers) or older brake levers. Most brake levers found on upright bikes were plain Weinmann or Dia Compe alloy brake levers that haven't changed much since the 1960s. They are nice and look at home on any classic bike, but I wanted something a little different. So I started looking at weird French brake levers.

I first had a set of these cool slim-lined aluminum brake levers. They looked great and also had a great feel. But I wanted something even cooler, weirder looking. My friend Fred had purchased a french Porteur bike from us a couple years ago, and it had Mafac inverse brake levers. I loved the look, but inverse brake levers were very hard to find. So went to the only place that would have them, Ebay. I bought various sets of them-CLB, no name, and finally set my eyes on a beautiful set of Frexel ones. They are sculpted, and highly polished, and a nice final touch- they are super lightweight. I have yet to install them on a bike, because I have no bicycle worthy of them yet. I am hoping that the same fortunate circumstances happen with the brake levers as what happened when I bought a Jack Taylor stem, I was given a Jack Taylor Super Tourist, missing a stem. So I am waiting on my Rene Herse Porteur bike, missing brake levers ;)

On my current city bike, a 1960s french Rochet road frame set up with Honjo fenders and Velo-Orange Porteur rack, I installed Tektro inverse brake levers. They are very nice and have a spring return. As nice as they feel, they have nothing on Frexel.